L1100 2-Post Car Lift | Heavy Duty Truck Hoist 10,000 lb Overhead Clear Floor (220V)

Upgrade your auto shop or garage with the robust and efficient L1100 2-Post Car Lift! This lift, powered by a 220V 3HP motor, offers a 10,000 lb lifting capacity, making it perfect for handling passenger vehicles and light trucks. Engineered for safety and ease of use, it combines high-quality components with a durable structure to ensure long-lasting performance.

Key Features

• Symmetrical arm assembly with a 2-stage reach from 30 1/4″ to 49 1/5″
• Equal-length front and rear arm design
• Includes drop-in type lifting pads and truck adapters

Safety Mechanism

• Double-point safety lock release
• Automatic arm lock restraints
• Relief valve in power pump to prevent overloading
• Door guard protection with rubber padding
• Up-limit switch for cylinder stroke protection
• Heavy-duty 5/16″ diameter cable and 4.56″ pulley for reduced stress and increased cable life
• 5/8″ thick stiffened base plate
• Ultra-high molecular self-lubricating nylon slider for smooth carriage movement
• Anchor bolts and mounting hardware included

Control System

• Lifting operation via “UP” button on motor
• Manual lowering operation via lever
• Relief valve in power pump to prevent overloading
• Includes 1 set of truck adapters

Specifications

• Lifting Capacity: 10,000 lbs
• Overall Height: 145-5/8″
• Overall Width: 133-1/4″
• Column Width: 10.62″
• Base Width: 18.89″
• Column Steel Thickness: 3/16″
• Carriage Steel Thickness: 15/64″
• Arms Steel Thickness: 15/64″
• Front Arm Length: 30.7″ to 48″
• Rear Arm Length: 30.7″ to 48″
• Min Pad Height: 3-7/8″
• Max Lift Height: 78-7/8″
• Drive-Through Width Clearance: 100″
• Time to Full Rise: 20-60 sec
• Shipping Weight: 1460 lbs

Site Selection

Before installation, consider the following guidelines to ensure a safe and optimal setup:

• Lift Location: Ensure adequate space using architect’s plans if available. The area should allow unrestricted lift operation.
• Overhead Area: Ensure no overhead obstructions (e.g., heaters, beams, wires).
• Floor Area: Check for cracked or defective concrete; ensure a solid, level base.

Floor Requirements

To ensure level lifting and safety:

• Use a level, cured concrete floor (minimum 30 days old).
• Install only on concrete; avoid asphalt or other surfaces.
• Do not install on expansion seams, cracked, or defective concrete.

Concrete Specifications

All models require a 3,000 PSI reinforced concrete base:

• 8,500 – 10,000 lbs lifts: Minimum 4″ thickness
• 11,000 – 15,000 lbs lifts: Minimum 6″ thickness

Additional Specifications

• Condition: New
• Modified Item: No
• Custom Bundle: No
• Material: Metal
• Capacity: 10,000 lbs
• Type: 2-Post Lift
• Features: Hydraulic
• Vehicle Type: Passenger Vehicle
• Brand: XK USA